Premium alloy wheels manufacturer? Mistake : take the wheel by “appearance”, ignore the hub parameters. The change of wheel hub style has an immediate effect on the appearance of the vehicle. But if only pay attention to the hub appearance did not pay attention to the hub parameters to match the original car data, it is easy to replace the hub and wing plate, calipers, shock scratch and even can not be loaded. The following important parameters of the wheel hub are related to the loading of the wheel hub, which needs special attention: Hole spacing (PCD) : must be exactly the same with the original car data. Offset: If the offset is not appropriate, the hub is easy to interfere with the shock absorber or wing plate. Center hole (CB/HUB) : If the center hole of the hub is small, it cannot be loaded at all. Size (Size) : the size of the modified hub should match the model. Too big or too small will have loading problems. Discover extra information at alloy rims manufacturers.
Jiangjin science and technology is a global leading wholesale alloy wheels manufacturer. JWHEEL alloy wheels wholesale company is located in Guangdong, Hong Kong and Macao Bay Area, an important node city of Jiangmen. With modern production facilities, we adopt the industry’s advanced casting, machining, painting and inspection equipment, equipped with automatic robots throughout the process, and with ERP system and other advanced management means, to create the industry benchmark for hardware, software and product quality. As we are also a wholesale alloy wheels manufacturer and supplier, we welcome bulk order inquiries.
To sum up, it can be concluded that aluminum wheels are the product of “high-speed”, “energy-saving” and “modern fashion” of automobiles. With the rapid development and development of the automobile market, aluminum wheels are used to gradually replace the traditional steel ring. The trend has become more and more intense, and there is an infinitely broad market prospect. Many people usually choose a wheel that is larger than the original product when buying a new wheel. The first thing to pay attention to is that the tire and the wheel are two inseparable parts. During the modification process, try to keep the extension diameter of the tire. It is necessary to remain unchanged or to keep the changes as small as possible. One of the main reasons is that if the deviation is too large, the accuracy of the meter will be problematic. It’s not feasible to just increase the wheel size without changing the tires. For example, if the tire size of the original car is 215/60R16 (16 means 16-inch wheels), then if you change to 17-inch wheels, the new tire size should preferably be 225/55R17, or 225/50R17.
The main advantages of pure electric vehicles are that the electricity bill is cheap and the cost of car maintenance is low. For users with a small radius of daily activities, such as home travel and commuting to get off work, the advantages are obvious. Similarly, for the urban population with limited numbers and licenses It’s also a good choice. As for hybrid models like gasoline and electric vehicles, the essence is still fuel vehicles. Electricity mainly plays an auxiliary role when starting and accelerating, and it is very important for energy saving and emission reduction.
One piece forged wheels,Milling and forging,The use of impact or pressure to deform the metal between the upper and lower two against the iron (anvil) to obtain the required block of blanks, blanks after heat treatment and then through the machining center milling and forming, a piece of relatively lighter weight, can achieve the most lightweight dynamic balance better reliability, no hidden gas leakage. The main advantages of steel hubs are simple manufacturing process, relatively low cost and strong resistance to metal fatigue. But the disadvantages are also obvious, such as heavy weight, large inertial resistance, poor heat dissipation and so on.
Jiangjin science and technology is a global leading custom alloy wheels suppliers and alloy rims manufacturers. The experience is the best protection for our customer. Jiangjin science and technology was established in 1992. After 28 years of development, it becomes a stable supplier of many famous wheel brands worldwide. The capcity goes 1.5 million piece of wheels per year. Our main products include casting wheels, forged wheels, flow formed wheel. Discover additional information at https://www.jjjwheel.com/.