Premium magnetic core manufacturer and supplier with Transmart? Transmart Industrial’s nanocrystalline core series include multiple types , For example, nanocrystalline cut cores,nanocrystalline toroidal cores,nanocrystalline tape wound cores,nanocrystalline powder cores, etc.Good materials, advanced production technology, and fine manufacturing techniques are used in the production of nanocrystalline core. Transmart nanocrystalline core suppliers & manufacturers designs transformer core material with to keep it outstanding among similar products. Read extra info on magnetic core manufacturers. Soft magnetic materials are those materials that are easily magnetised and demagnetised. They typically have intrinsic coercivity less than 1000 Am-1. They are used primarily to enhance and/or channel the flux produced by an electric current. The main parameter, often used as a figure of merit for soft magnetic materials, is the relative permeability (µr, where µr = B/ µoH), which is a measure of how readily the material responds to the applied magnetic field. The other main parameters of interest are the coercivity, the saturation magnetisation and the electrical conductivity.

The transformer is made according to the principle of electromagnetic induction Two windings, a primary winding and a secondary winding, are wound around the closed iron core column When AC power supply voltage is applied to the primary winding There is alternating current in the original Rao group, and the magnetic potential is established. Under the action of the magnetic potential, the alternating main flux is generated in the iron core. The main flux passes through the iron core at the same time, AC link the primary and secondary windings are closed, and the induced electromotive force is generated in the primary and secondary windings respectively due to the action of electromagnetic induction.

Hysteresis loss is the iron loss caused by the hysteresis phenomenon in the magnetization process of the iron core. The size of this loss is directly proportional to the area surrounded by the hysteresis loop of the material. The hysteresis loop of silicon steel is narrow, and the hysteresis loss of transformer core made of silicon steel is small, which can greatly reduce its heating degree. Since silicon steel has the above advantages, why not use the whole silicon steel as the iron core and process it into a sheet? rolled silicon steel sheet is selected. It is cut into long pieces according to the size of the required iron core, and then overlapped into “day” shape or “mouth” shape. In principle, in order to reduce eddy current, the thinner the silicon steel sheet, the narrower the spliced strip, and the better the effect. This not only reduces the eddy current loss and temperature rise, but also saves the material of silicon steel sheet. But in fact, when making silicon steel sheet iron core. Not only from the above favorable factors, because making the iron core in that way will greatly increase the working hours and reduce the effective section of the iron core. Therefore, when making transformer iron core with silicon steel sheet, we should start from the specific situation, weigh the advantages and disadvantages and choose the best size.

Transmart amorphous core manufacturer & supplier is mainly engaged in the production and sales of amorphous core materials. The amorphous core transformer is one of Transmart Industrial’s multiple product series.Transmart Industrial’s amorphous C-core is manufactured in strict accordance with relevant national standards. Every detail matters in the production. Strict cost control promotes the production of high-quality and priced-low product. Such a amorphous transformer is up to customers’ needs for a highly cost-effective product. Find even more details on https://www.transmart.net/.

Working magnetic flux density of Fe based amorphous alloy core: 1.35t ~ 1.40t, 1.6T ~ 1.7t for silicon steel. The weight of iron-based amorphous alloy power frequency transformer is about 130% of that of silicon steel power frequency transformer. However, even if the weight is heavy, the loss of iron-based amorphous alloy for power frequency transformer with the same capacity is 70% ~ 80% lower than that of silicon steel. Considering the loss, the total evaluation price is 89% The ability of Fe based amorphous alloy to resist power waveform distortion is stronger than that of silicon steel.

The soft magnetic particle core will still be high along the high BS in the future μ、 High Tc, low PC, magnetic powder core is a soft magnetic material made of ferromagnetic powder and insulating medium. Because the ferromagnetic particles are very small (0.55 for high frequency) μ M is separated by non-magnetic electrical insulating film material. Low HC and high frequency, miniaturization and thinness to meet the trend of increasingly thin film, miniaturization and even integration of magnetic components.