Dirt Removal services in Loveland, Colorado with Stormheart Construction? Excavation safety is a combination of safety precautions and mitigations in and around excavations and trenches to eliminate or control hazards in compliance with industry standards and regulations. Why is Excavation and Trench Safety Important? Excavation and trenching are amongst the most dangerous operations in the construction industry. Dangers can include cave-ins, falling loads, hazardous atmospheres and hazards from using heavy equipment. Regular pre-work inspections can reduce hazards and serious risk of injury. Safety inspections should check for the type of excavation being conducted, support and warning systems in place, access areas, weather conditions, heavy equipment and PPE.

Drawings need to be translated into a list of materials and labour. Materials are fairly easy to check online but labour rates are harder to predict, varying considerably depending on market forces – how busy builders are – and the geographical area (prices tend to be higher in posh postcode areas!). Obtaining competitive quotes based on clear drawings and specifications should help pin costs down in advance. Before you can start to predict costs, you need to have a good idea of your proposed plans, your specification for fixtures and fittings, and have decided who is doing what. To estimate costs, look at other people’s projects and expect to spend a similar amount, taking into account how much work they did themselves, when the project was completed, and the variation in labour costs.

OSHA defines excavating as “any man-made cut, cavity, trench, or depression in an earth surface formed by earth removal.” A trench is a type of narrow excavation in which the depth is typically greater than the width, which does not exceed 15 feet. According to this definition, all trenches are excavations, but not all excavations are trenches. The specific safety requirements for trenches depend on the depth of the trench. See additional details at Excavation services Fort Collins.

Get the first course right. Use a torpedo level to level each block front to back and either a 4-foot or 6-foot level to keep each course level and even. Set the blocks with a heavy rubber or plastic mallet. Getting the first course flat and level is extremely important, so take your time. Try to lay the course as close to the center of the trench as possible. Even a small pebble on the surface of a block will throw the one above it out of alignment. And that crooked block will affect the one above it, and so on. That little stone could eventually create an unattractive hump in the top course.While you’re at it, do also place a call DigSafe (811), a nationwide service that will notify local utility companies that you plan to dig. These can determine whether their buried lines will be in the way and mark their exact locations. Retaining walls can be constructed using a variety of materials, from poured concrete and large timbers to natural stones, even bricks. For DIY purposes, opt for manufactured blocks that are designed specifically for building retaining walls; a locking flange along the bottom edge creates a secure attachment between rows. These blocks (available in gray and earthy tones in smooth or textured faces, like these at The Home Depot) can be found at virtually any home improvement store and many garden centers as well.

If the block Retaining wall is more substantial as in a metre high or more then the fence would have to be behind the wall instead of through or on top. Most Segmental Retaining Wall blocks do not have a big enough cavity or void for the fence post to be directly concreted inside them and would lack the strength to hold the weight of a fence. Generally, most walls are built using an aggregate (Gravel) backfill or in some circumstances No Fines Concrete (NFC). Because of this, an allowance has to be made for the fence post at the early construction stage such as installing PVC Piping as a sleave for the fence post to fit into, this would require some forethought and good planning. Discover more information at here.