High quality pwht machine supplier? Induction heating is the process of heating an electrically conducting object (usually a metal) by electromagnetic induction, through heat generated in the object by eddy currents. An induction heater consists of an electromagnet and an electronic oscillator that passes a high-frequency alternating current (AC) through the electromagnet. The rapidly alternating magnetic field penetrates the object, generating electric currents inside the conductor, called eddy currents.
It’s a common misconception that induction heaters don’t work for aluminum and other non-ferrous metals. This is not true. This induction heater will heat up aluminum and copper just fine, but not as fast as ferrous metals. This is mainly due to their lower resistivity. The higher the resistivity of the conductive material, the more it generates heat when current is passed through it. The higher resistivity of most ferrous metals coupled with the heating due to hysteresis makes them ideal for induction heating, but they are not the only metals affected by induction.
IGBT small induction melting furnace for steel, copper, brass, aluminum, gold melting, The melting power is from 15KW ~ 160KW. The melting capacity is from 2 kg ~ 150 kg. 1. MF melting furnace can be used for the melting of steel, stainless steel, brass,cooper, gold and so on. 2. Because of the stirring effect which caused by the magnetic force, the melting pool can be stirred during the melting course to ease the floating of the flux and oxides to produce high quantity casting parts. 3. Wide frequency range from 1KHZ to 20 KHZ, working frequency can be designed by changing the coil and compensating capacitor according to the melting material, quantity, stirring effect desire, working noise, melting efficiency and other factors. See extra information on induction heating equipment manufacturers.
A torch is commonly used when you can’t loosen a seized nut or bolt. By heating the nut with the induction heater, the metal will expand and you can free the seized hardware. Using a torch is dangerous in confined areas and using flameless heat prevents damage to the surrounding parts such as, wire harnesses, fuel lines, anything plastic, anything volatile and flammable. Induction heaters are often used by aircraft mechanics when using a flame would be a bad idea. Here, you can see that the coil is levitating the aluminum. The works because of Lenz’s law. This means that when it is introduced to a constantly changing magnetic field, the induced currents in the aluminum create an opposing field to that of the coil. This is the same thing that is happening when you drop a strong magnet down a copper pipe. The magnet is slowed down due to the opposing field that the copper is producing.
MYF Melting Furnace is designed for Non-ferrous Metal Melting. Which is used for Copper, Aluminum, Zinc, Tin and Lead melting. The power size is 40KW-600KW. The Induction Heating Power and Melting Furnace are equipped with water cooling system. The air cooling ones will need customization.The Graphite Crucible furnace capacity is 100-1000kg copper or equivalent. In general, it will cost 300-350KW*H electric power to melt 1MT copper. See additional information at here.